• Visual Guidance
    • Preface
      • Information on compliance with communication regulations
      • General Safety
      • Important safety information
    • Overview of console
      • Turning the console on
      • Shutting down the console
      • Using the console toolbar
    • Description of user interface
      • Settings screen controls
      • Operations screen controls
      • Description of icons
      • View controls
      • Other icons
    • Quick setting guide
      • Software update instructions
      • Introductory guide
    • Region and User settings
      • Region settings
      • Lightbar setup
      • Environment configuration
      • Setting up map options
      • Setting access level
    • System function
      • Function configuration
      • GPS setup
      • Alarm settings
      • Setting flag points
    • Vehicle setup
      • Selecting a vehicle
      • Creating a new vehicle
      • Vehicle geometry configuration
      • Steering controller setup
      • Selecting vehicle antenna
    • Implement setup
      • Selecting an implement
      • Setting up a new implement
      • Implement geometry configuration
      • Section control setup
      • Configuring master switch
      • Configuration GPS speed emulation
    • Product configuration
    • Basic information on the Operations screen
      • Using the window toolbar
      • Using the navigation window
      • Viewing the guidance system
      • Viewing GPS information
      • View system diagnostic tests
      • Viewing job information
      • Monitoring using the dashboard
      • Storing information about jobs
      • Colour codes and operating status
      • Understanding default file names
    • Steering calibration
      • Calibrating the compass
      • Calibrating the wheel angle sensor
      • Mounting bias calibration
      • Resolving calibration errors/alarms
    • Field menu
      • Creating a client / farm / field
      • Selecting a client / farm / field
      • Setting a new boundary
      • Setting flag points
      • Unloading a field
    • Job menu
      • Creating a new job
      • Selecting an existing job
      • Job data logging
      • Export a job report
      • Deleting a job
    • Guideline menu
      • Using straight lines guidelines
      • Using identical curve guidelines
      • Using pivot guidelines
      • Using Guidelock guidance mode
      • Selecting an existing guideline
    • Autosteer
      • Autosteer status
      • Autosteer fine tuning
      • Engaging the autosteer function
      • Disengaging the autosteer function
    • Nudge menu
      • Using nudge options
      • Compensating for GPS drift
    • Inventory manager
      • Using the manager toolbar
      • Using Item Manager
  • Appendices
    • Common error messages
    • Technical Information
    • Glossary of terms
    • Information ownership
  • All Files
You are here: Visual Guidance > Basic information on the Operations screen > View system diagnostic tests

View system diagnostic tests

To view diagnostic information:

  1. Select System diagnostic tests from the navigation window . Memory usage is displayed.
  • Basic information on the Operations screen
    • Using the window toolbar
    • Using the navigation window
    • Viewing the guidance system
    • Viewing GPS information
    • View system diagnostic tests
    • Viewing job information
    • Monitoring using the dashboard
    • Storing information about jobs
    • Colour codes and operating status
    • Understanding default file names

© 2016 SAME DEUTZ-FAHR ITALIA S.p.A.

Visual Guidance | User manual Rev. 20160727 307.U.T902.en.S.03